[Q37-Q60] 2026 Verified FlashArray-Storage-Professional dumps Q&As on your FlashArray Storage Exam Questions Certain Success!

Rate this post

2026 Verified FlashArray-Storage-Professional dumps Q&As on your FlashArray Storage Exam Questions Certain Success!

FlashArray-Storage-Professional Exam Dumps – 100% Marks In FlashArray-Storage-Professional Exam!

Q37. Which FA File Directory Services statement is correct?

FA File uses file service interfaces as default for directory service communication.

FA File uses management interfaces as default for directory service communication.

FA File uses all network interfaces for DNS and directory service communication.

Q38. An administrator needs a comparison of FA File performance across multiple arrays.
What Pure1 Manage report will provide the best results?

File Systems Performance

Overview Dashboard

Array Performance

Q39. A storage administrator is troubleshooting a FlashArray that is critically low on space. They have successfully deleted and eradicated a large volume, but used space keeps increasing.
What is a possible cause?

Space decrease won’t be seen for 1 day, as the volume is kept for 24 hours as a safeguard.

FlashArray workload is too high, and the reclamation process is not keeping up.

A host is still connected to the volume so space was not released.

Q40. Which protection group cannot be ratcheted for SafeMode?

A default protection group

Protection groups with hosts or hostgroups

A protection group without a local snapshot schedule

Q41. Refer to the exhibit:

What is the most likely cause of system space in this capacity graph?

Space reclamation stopped working properly.

Large volume destroyed and eradicated.

SafeMode was enabled on the system.

Q42. How should an administrator configure initiator-to-target connections for zones with multiple initiators?

Multiple initiator to multiple target zone sets

Single initiator to multiple target zone sets

Single target to multiple initiator zone sets

Q43. A customer is managing a VMware environment and has recently copied a snapshot from a Pure Storage array to a new volume. When attempting to mount this volume on a VMware virtual machine, the operation fails.
How should this be resolved?

Resignature the volume.

Reformat the volume.

Adjust the VMware security settings.

Q44. A FlashArray administrator is configuring new hosts. There is an option in the personality settings for the target OS.
When is the best time to configure the personality for a host in Purity?

When a host is initially created and before volumes are connected to the host.

Host personalities can be configured at anytime except for the ESXi operating system.

After the host has been created and volumes are connected to the host.

Q45. A storage administrator needs to determine what actions were taken on the array by the previous shift and is only able to access the FlashArray via CLI.
Which command provides that information?

pureaudit list — puremessage

pureaudit list

puremessage list

Q46. RFC2307 enables cross-protocol support for which two protocols?

NFS, S3

S3, SMB

NFS, SMB

Q47. An ActiveCluster (AC) FlashArray pair lost connectivity with each other over the replication network. When the pod failover occurred, a single volume in the stretched pod lost connectivity to its host while other volumes in the stretched pod remained available to the host.
What is the most likely cause of the loss of stretched volume connectivity from the host?

Uniform volume access was not configured for the volume from the host.

Fibre Channel (FC) zoning or network access has not been created properly for the host.

The host initiators were not registered in Purity for the host.

Q48. An administrator is testing FA File Services configurations and unintentionally disabled User Mapping on an active NFS Export.
What happens to file accessibility on that export?

The changes to authentication will not be applied until the export is restarted.

The export will lose accessibility to all existing files but have no issue with file creation.

The export will retain accessibility to all existing files but new files can not be created.

Q49. An administrator needs to enable Remote Assist (RA) on Purity version 6.8.4 to facilitate remote troubleshooting. Due to security restrictions, only certain commands can be executed on the array.
What type of access should the administrator grant when enabling RA?

Elevated

Secured

Restricted

Q50. Twelve stretched pods are synchronously replicating between an ActiveCluster (AC) FlashArray pair. A new unstretched pod is created and then is stretched, but the operation fails.
What is the most likely cause of the operation not completing successfully?

There is a pod that was deleted and not eradicated.

The mediator is not available on the FlashArray that the pod is being stretched to.

The ActiveCluster (AC) pair has reached its stretch pod limit.

Q51. A FlashArray//XL is used for NVMe-RoCE services. The array has been lightly loaded and has performed as expected. A new workload has been added to the array, which is within the array’s performance envelope. The change has resulted in extreme latency and service outages for all workloads utilizing NVMe-RoCE.
Which misconfiguration is this a symptom of?

NVMe-RoCE is not supported by the new workload.

Priority Flow Control (PFC) is not configured properly.

The ports are configured with NVMe-RoCE and Replication concurrently.

Q52. In reviewing space metrics via the Pure Management GUI, a storage manager notices the total reduction rate is much higher than the Data Reduction Rate (DRR).
What is the reason for this?

The total reduction rate includes compression, while the Data Reduction Rate (DRR) does not.

The total reduction rate includes thin provisioning, while the Data Reduction Rate (DRR) does not.

The total reduction rate includes snapshot space, while the Data Reduction Rate (DRR) does not.

Q53. What FA File user authentication statement is correct?

FA File can use either Microsoft Active Directory (AD) or OpenLDAP for authentication.

FA File can use both Microsoft Active Directory (AD) and SSO for authentication.

FA File can use either LDAP or SAML for authentication.

Q54. In Pure Protect //DRaaS, the administrator modified the business policy used for backups, reducing the “DR Retention” from 7 days to 3 days. The DR target environment currently has 7 days of backups.
What will occur?

The change will error out, requiring manual expiration of backups older than 3 days.

Earlier backups will be erased to match the modified policy.

Earlier backups will be retained until they expire according to the pre-modification policy, with new backups following the updated policy.

Q55. Which storage protocol is best suited for a Hyper-V cluster in an ethernet-switched environment?

NVMe/FC

NVMe/RoCE

iSCSI

Q56. A storage administrator is tasked with providing real-time data and alerts to the Network Operations Center (NOC) dashboard.
What source should the information come from to provide real-time data?

Pure Performance Monitoring

Pure1

FlashArray

Q57. What is the proper configuration method to connect a volume to multiple hosts?

Connect the volume to a host group.

Connect a volume group to the host.

Connect the volume to each individual host.

Q58. A FlashArray is configured to use directory services. A user is a member of the groups associated with both Array Admin and Storage Admin.
What will the user experience when logging into the array?

Inability to login

Storage Admin permissions

Array Admin permissions

Q59. A customer with an X50R2 array connected to 110V power is due for an upgrade to the latest controller generation.
What is required to allow this upgrade to proceed?

Call support to schedule a power supply replacement.

Transition the array to DC power.

Switch the array to 220v power outlets.

Q60. When is it possible to simulate snapshot policies in the Pure1 Snapshot Policies (SafeMode)?

When a FlashArray has existing snapshots

When a FlashArray does not have existing snapshots

When a FlashArray has an existing saved workload simulation

Pure Storage FlashArray-Storage-Professional Exam Syllabus Topics:

Topic	Details
Topic 1	Troubleshooting: Covers identification and resolution of configuration errors, performance issues, and replication problems using Pure Storage diagnostic tools and alerts. Includes port configuration and predictive support mechanisms to maintain system reliability.
Topic 2	Data Protection: Covers snapshot management, replication configuration, policy management, SafeMode, and advanced replication technologies such as ActiveDR. Focuses on ensuring data availability, disaster recovery, and protection against data loss.
Topic 3	Administration: Covers core administrative tasks including volume configuration, array management, host connections, third-party integrations, and security protocols. Focuses on best practices for maintaining optimal performance and secure access across the storage environment.
Topic 4	FA File: Covers configuration and management of FA File services, including DNS setup, Active Directory integration, and protocol access. Focuses on enabling secure and efficient file sharing across the organization.
Topic 5	Monitoring: Covers the use of Pure1, GUI, and CLI tools to monitor array health, generate reports, and analyze performance and capacity metrics. Includes data reduction ratios, meta forecasting, and proactive capacity planning.