Sep-2025 Fortinet FCSS_EFW_AD-7.4 Actual Questions and Braindumps [Q19-Q42]

Rate this post

Sep-2025 Fortinet FCSS_EFW_AD-7.4 Actual Questions and Braindumps

FCSS_EFW_AD-7.4 Dumps To Pass Fortinet Exam in 24 Hours – ExamDumpsVCE

Fortinet FCSS_EFW_AD-7.4 Exam Syllabus Topics:

Topic	Details
Topic 1	VPN: This section of the exam measures the skills of Network Security Engineers and covers the implementation of secure communication tunnels for enterprise environments. Candidates will learn to configure IPsec VPN with IKE version 2 to establish encrypted connections. The section also includes the implementation of ADVPN to enable on-demand VPN tunnels between different sites, ensuring secure and dynamic connectivity.
Topic 2	Central Management: This section of the exam measures the skills of Security Administrators and focuses on implementing central management for Fortinet security solutions. It includes configuring and managing devices centrally to streamline network security operations. Candidates will understand how to maintain consistency in security policies and automate deployments for efficient management of large-scale enterprise environments.
Topic 3	Security Profiles: This section of the exam measures the skills of Network Security Engineers and focuses on managing security inspection profiles, including SSL and SSH inspections. Candidates will learn to apply a combination of web filtering, application control, and Internet Service Database (ISDB) to enhance network security. The section also covers integrating Intrusion Prevention Systems (IPS) to monitor and mitigate threats within enterprise networks.
Topic 4	Routing: This section of the exam measures the skills of Security Administrators and covers the implementation of advanced routing protocols to manage enterprise traffic effectively. Candidates will gain expertise in configuring Open Shortest Path First (OSPF) for dynamic routing and Border Gateway Protocol (BGP) to facilitate communication between different networks, ensuring efficient traffic flow across enterprise environments.
Topic 5	System Configuration: This section of the exam measures the skills of Network Security Engineers and covers the implementation of the Fortinet Security Fabric, ensuring seamless integration across security solutions. It also includes configuring hardware acceleration on FortiGate devices to optimize performance. Candidates will learn to set up different operation modes for high-availability clusters and implement enterprise networks using VLANs and VDOMs. Additionally, it covers various use case scenarios that demonstrate how Fortinet solutions contribute to secure network environments.

NEW QUESTION 19
Refer to the exhibit, which shows the output of a diagnose command.

What can be concluded about the debug output in this scenario?

Servers with a negative TZ value are less preferred for rating requests.

There is a natural correlation between the value in the Packets field and the value in the Weight field.

FortiGate used 64.26.151.37 as the initial server to validate its contract.

The first server provided to FortiGate when it performed a DNS query looking for a list of rating servers, was 121.111.236.179.

NEW QUESTION 20
An administrator configured the FortiGate devices in an enterprise network to join the Fortinet Security Fabric. The administrator has a list of IP addresses that must be blocked by the data center firewall. This list is updated daily.
How can the administrator automate a firewall policy with the daily updated list?

With FortiNAC

With FortiAnalyzer

With a Security Fabric automation

With an external connector from Threat Feeds

NEW QUESTION 21
An administrator wants to capture ESP traffic between two FortiGates using the built-in sniffer. If the administrator knows that there is no NAT device located between both FortiGates, What command should the administrator execute?

diagnose sniffer packet any ‘udp port 500’

diagnose sniffer packet any ‘udp port 4500’

diagnose sniffer packet any ‘esp’

diagnose sniffer packet any ‘udp port 500 or udp port 4500’

NEW QUESTION 22
Refer to the exhibit, which contains a session table entry.

Which statement about FortiGate inspection of this session is true?

FortiGate applied proxy-based inspection.

FortiGate applied flow-based NGFW policy-based inspection.

FortiGate applied flow-based inspection.

FortiGate forwarded this session without any inspection.

NEW QUESTION 23
Examine the output of the ‘get router info bgp summary’ command shown in the exhibit; then answer the question below.

Which statement can explain why the state of the remote BGP peer 10.200.3.1 is Connect?

The local peer is receiving the BGP keepalives from the remote peer but it has not received any BGP prefix yet.

The TCP session for the BGP connection to 10.200.3.1 is down.

The local peer has received the BGP prefixed from the remote peer.

The local peer is receiving the BGP keepalives from the remote peer but it has not received the OpenConfirm yet.

NEW QUESTION 24
Refer to the exhibit, which shows the packet capture output of a three-way handshake between FortiGate and FortiManager Cloud.

What two conclusions can you draw from the exhibit? (Choose two.)

FortiGate will receive a certificate that supports multiple domains because FortiManager operates in a cloud computing environment.

FortiGate is connecting to the same IP server and will receive an independent certificate for its connection between FortiGate and FortiManager Cloud.

If the TLS handshake contains 17 cipher suites it means the TLS version must be 1.0 on this three-way handshake.

The wildcard for the domain *.fortinet-ca2.support.fortinet.com must be supported by FortiManager Cloud.

NEW QUESTION 25
View the exhibit, which contains a hub-and-spoke VPN topology with two hubs, then answer the question below.

An administrator wants to configure ADVPN.
Which ADVPN setting needs to be enabled in the tunnel between Hub1 and Hub2 FortiGates?

set auto-discovery-forwarder enabled

set auto-discovery-receiver enabled

set auto-discovery-sender enabled

set auto-discovery-ipsec enabled

NEW QUESTION 26
Which two configurations are mandatory for an auto-discovery VPN (ADVPN) implementation on a hub? (Choose two.)

The remote-ip must be on a different IP address from the overlay subnet.

set net-device must be disabled to avoid dynamic interface creation.

set add-route must be enabled to add routes.

An overlay IP address with a mask of /32 must be assigned to the IPsec virtual interface.

NEW QUESTION 27
Examine the output from the BGP real time debug shown in the exhibit, then the answer the question below.

Which statements are true regarding the output in the exhibit? (Choose two.)

BGP peers have successfully inter changed Open and Keep alive messages.

Local BGP peer received a prefix for a default route.

The state of the remote BGP peer is Open Confirm.

The state of the remote BGP peer will go to Connect after it confirms the received prefixes.

NEW QUESTION 28
Which two statements about OCVPN are true? (Choose two.)

Only root vdom supports OCVPN.

OCVPN supports static and dynamic IPs in WAN interface.

OCVPN offers only Hub-Spoke VPNs.

FortiGate devices under different FortiCare accounts can be used to form OCVPN.

NEW QUESTION 29
Which of the following troubleshooting steps is applicable when investigating antivirus and IPS update issues on FortiGate?

Use the alternate service port 8888.

Validate DNS resolution for update.fortiguard.net.

Verify outbound ICMP connectivity.

Use the diagnose debug rating command to check active servers.

NEW QUESTION 30
Refer to the exhibit, which shows a physical topology and a traffic log.

The administrator is checking on FortiAnalyzer traffic from the device with IP address 10.1.10.1, located behind the FortiGate ISFW device.
The firewall policy in on the ISFW device does not have UTM enabled and the administrator is surprised to see a log with the action Malware, as shown in the exhibit.
What are the two reasons FortiAnalyzer would display this log? (Choose two.)

Security rating is enabled in ISFW.

ISFW is in a Security Fabric environment.

ISFW is not connected to FortiAnalyzer and must go through NGFW-1.

The firewall policy in NGFW-1 has UTM enabled.

NEW QUESTION 31
Which of the following tasks are part of the manual registration process for adding a FortiGate to a FortiManager for central management? (Choose three.)

Wait for the rating databases to download on FortiManager.

In the FortiManager, add the unregistered FortiGate.

Import the policy package from the managed FortiGate.

Start the rating services on FortiManager.

Add the FortiManager IP address to the FortiGate’s central management configuration.

NEW QUESTION 32
What configuration changes can reduce the memory utilization in a FortiGate? (Choose two.)

Reduce the session time to live.

Increase the TCP session timers.

Increase the FortiGuard cache time to live.

Reduce the maximum file size to inspect.

NEW QUESTION 33
Refer to the exhibit, which contains a partial VPN configuration.

What can you conclude from this VPN IPsec phase 1 configuration?

This configuration is the best for networks with regular traffic intervals, providing a balance between connectivity assurance and resource utilization.

Peer IDs are unencrypted and exposed, creating a security risk.

FortiGate will not add a route to its routing or forwarding information base when the dynamic tunnel is negotiated.

A separate interface is created for each dial-up tunnel, which can be slower and more resource intensive, especially in large networks.

NEW QUESTION 34
Which two statements correctly describe the characteristics of the Fortinet Security Fabric? (Choose two.)

It supports an open API, allowing third-party product integration.

It provides a single pane of glass for reporting for all devices in the Security Fabric.

The core of the Security Fabric includes FortiMail, FortiWeb, and FortiSandbox.

It contains individual management platforms for each device to provide granular control.

NEW QUESTION 35
An administrator must enable direct communication between multiple spokes in a company’s network. Each spoke has more than one internet connection. The requirement is for the spokes to connect directly without passing through the hub, and for the links to automatically switch to the best available connection. How can this automatic detection and optimal link utilization between spokes be achieved?

Set up OSPF routing over static VPN tunnels between spokes.

Utilize ADVPN 2.0 to facilitate dynamic direct tunnels and automatic link optimization.

Establish static VPN tunnels between spokes with predefined backup routes.

Implement SD-WAN policies at the hub to manage spoke link quality.

NEW QUESTION 36
Which statement about administrative domains (ADOMs) on FortiManager is true?

The number of configurable ADOMs is based on the FortiManager FortiCare service contract.

The ADOM feature can be enabled by any administrative user.

FortiGate devices with multiple VDOMs must be assigned to the same ADOM on FortiManager.

ADOMs allow grouping of managed devices based on management criteria and administrative access.

NEW QUESTION 37
An administrator wants to simplify a new hub-and-spoke network deployment with the BGP recommended configuration.
Which two sections on FortiManager must the administrator use? (Choose two.)

Provisioning Templates

Meta Fields

Metadata Variables

Automation Stitch

NEW QUESTION 38
Which action will FortiGate take when using the default settings for SSL certificate inspection, where the server name indication (SNI) does not match either the common name (CN) or any of the subject altemative names (SAN) in the server certificate?

FortiGate uses the CN information from the Subject field in the server certificate.

FortiGate uses the first entry listed in the SAN field in the server certificate.

FortiGate uses the SNI from the user’s web browser.

FortiGate closes the connection because this represents an invalid SSL/TLS configuration.

NEW QUESTION 39
Refer to the exhibit, which shows an OSPF network.

Which configuration must the administrator apply to optimize the OSPF database?

Set a route map in the AS boundary FortiGate.

Set the area 0.0.0.1 to the type STUB in the area border FortiGate.

Set an access list in the AS boundary FortiGate.

Set the area 0.0.0.1 to the type NSSA in the area border FortiGate.

NEW QUESTION 40
View the exhibit, which contains the output of a debug command, and then answer the question below.

Which of the following statements about the exhibit are true? (Choose two.)

In the network on port4, two OSPF routers are down

Port4 is connected to the OSPF backbone area.

The local FortiGate’s OSPF router ID is 0.0.0.4

The local FortiGate has been elected as the OSPF backup designated router.

NEW QUESTION 41
An administrator needs to install an IPS profile without triggering false positives that can impact applications and cause problems with the user’s normal traffic flow. Which action can the administrator take to prevent false positives on IPS analysis?

Use the IPS profile extension to select an operating system, protocol, and application for all the network internal services and users to prevent false positives.

Enable Scan Outgoing Connections to avoid clicking suspicious links or attachments that can deliver botnet malware and create false positives.

Use an IPS profile with action monitor, however, the administrator must be aware that this can compromise network integrity.

Install missing or expired SSUTLS certificates on the client PC to prevent expected false positives.

NEW QUESTION 42
What are two functions of automation stitches? (Choose two.)

Automation stitches can be configured on any FortiGate device in a Security Fabric environment.

An automation stitch configured to execute actions sequentially can take parameters from previous actions as input for the current action.

Automation stitches can be created to run diagnostic commands and attach the results to an email message when CPU or memory usage exceeds specified thresholds.

An automation stitch configured to execute actions in parallel can be set to insert a specific delay between actions.