Exam Dumps VCE

Q158. Which user provided block of IP addresses to the VxRail initialization wizard may contain non-contiguous addresses?

Q159. What is a Dell EMC converged platform product?

Q160. Which network feature is unsupported on the VxRail system NIC ports?

Q161. Use the VxRail simulator to explore the system.






What is the presented configuration? Note: It fs necessary to close (x) the simulator window before you can select a response to this question.

Q162. After initial installation the vSAN health check is reporting issues.
Which action needs to be taken to correct the vSAN health check error?

Q163. Which steps need to be taken to perform a file based restore of VxRail Manager?

Q164. In addition to hardware monitoring, what is the purpose of the Dell PTAgent service on a VxRail node?

Q165. Match each VxRail configuration with its related characteristic.

Q166. A systems engineer is deploying a VxRail cluster. They want to ensure that configuration issues can be avoided when expanding this cluster.
Which actions need to be performed?

Q167. What logs can be gathered using the VxRail plug-in?

Q168. What network setting is the optional configuration on the port group for a customer-supplied VDS before the VxRail cluster is deployed?

Q169. What step is a best practice in the deployment process of a VxRail Appliance with an External vCenter server?

Q170. RecoverPoint for VM has been deployed on a VxRail cluster. Data protection and management capabilities are provided within the vSphere management interface.
What method within vSphere Operations should be used to ensure a successful outcome?

Q171. How many cables are required to install a 4 node VxRail Model G410 cluster with 1 GbE into a rack?

Q172. When validating the completed VxRail PEQ, you note the following VLANs in the configuration:
– VxRailManagement – VLAN 120
– vSAN – VLAN 121
– vMotion – VLAN 122
– Servers – VLAN 204
– NetManagement – VLAN 208
Which command should you use to validate that the VLANs are configured on each Dell EMC ToR switch?

Q173. When resetting a Dell PowerEdge-based VxRail node to an existing factory image, which boot device should be selected?

Q174. A VxRail cluster has just been deployed. The administrator notices that Deduplication and Compression are not enabled.
What is the reason for this issue?

Q175. What would be the result if no value is entered for “NTP Server(s)” in the First Run Wizard during VxRail deployment?

Q176. What is the correct CLI command to collect only the vCenter logs on VxRail Manager?

Q177. The vCenter managing a VxRail cluster must be able to support both Enhanced Linked Mode and vSAN Encryption.
What is the correct configuration to satisfy this requirement?

Q178. What is the maximum number of nodes supported in a standard VxRail Appliance configuration?

Q179. An implementation engineer is tasked with expanding an 8-node VxRail E560 cluster with an S570 node. The cluster has been configured with 1 GbE networking.
Which two should be considered when planning to expand the cluster? (Select 2)

Q180. Refer to the exhibit.

You have received the attached PEQ for an upcoming VxRail implementation. However, you have no additional supporting documents.
Who should be your first point of contact for additional information?

Q181. The vSAN Health Check of a VxRail cluster is reporting errors about the stats.db object.
What could be a possible cause of this problem?

Q182. You have determined that you need to execute a RASR factory upgrade of a VxRail v4.7.1xx node You download the RASR ISO from the Dell Support site.
What is the correct order of steps to finish the upgrade?