[2024] Use Real EMC Dumps – 100% Free DES-3128 Exam Dumps [Q36-Q55]

Rate this post

[2024] Use Real EMC Dumps – 100% Free DES-3128 Exam Dumps

Realistic DES-3128 Dumps Latest EMC Practice Tests Dumps

By passing the EMC DES-3128 exam, candidates can demonstrate their expertise in NetWorker technologies, which can help them advance their careers in the IT industry. Specialist – Implementation Engineer, NetWorker Exam certification validates that the candidate has the skills and knowledge to configure and manage NetWorker software, backup and recovery operations, and integration with other EMC products. Moreover, certified professionals can contribute to the organization’s success by ensuring the availability and protection of critical data, reducing downtime, and improving the overall efficiency of the IT infrastructure.

NEW QUESTION 36
In a NetWorker environment, a daily scheduled backup was started. However, the volume did not mount, and the backup failed.
What is the reason for the failure?

Protection group is not selected on the pool.

Tape volumes attached to the NetWorker server are recyclable.

There are no appendable volumes that match the pool.

Volumes labeled in the required pool are appendable.

NEW QUESTION 37
A NetWorker server is utilizing a remote storage node. A media library with two LTO Ultnum-8 drives is attached to the storage node via Fiber Channel interface. There is an AFTD device labeled to the Dally pool, and a media library has several cartridges labeled for the Weekly pool.
All devices are configured on the storage node. A Windows 2019 client is being backed up to the Daily pool while the Client Direct option is enabled in the client’s properties.
What is the correct data flow?

The storage node writes the data to the LTO Ultrium-8 device.

The storage node writes the data to the AFTD device.

Backup data is being written directly to the LTO Ultrium-8 device.

Backup data is being written directly to the AFTD device.

In this scenario, the NetWorker server is utilizing a remote storage node with a media library containing two LTO Ultnum-8 drives. The AFTD device is labeled to the Dally pool and the media library has several cartridges labeled for the Weekly pool. When the Client Direct option is enabled in the client’s properties, the storage node writes the backup data to the LTO Ultrium-8 device.

NEW QUESTION 38
A customer has installed a new PowerProcted DO series appliance named DD0. The DD Boost user name is ddboost and the password is abc123. A single DD Boost device named DD01.SU01 labeled to DO.VMware_Pool is needed Use the simulator to create the desired configuration When you have finished, continue to the next question.

Send the feedback for this answer.

NEW QUESTION 39
What is the outcome of using the recover -iN command?

The recovered file is renamed when a conflict occurs.

A recover is simulated, and no data is recovered.

The file is not recovered if a conflict occurs.

The file overwrites the existing file if it is newer than the existing file.

NEW QUESTION 40
A backup administrator is deploying an extended client on a Linux host. The following error is observed during the installation:
Cannot contact a portmapper on port 7937
What is the recommended action to resolve this issue?

Install the lgtoclnt-[version].rpm package and reinstall the Extended client.

Install the lgtoserv-[version] rpm package and reinstall the Extended client.

Install the lgtonode-[version].rpm package and reinstall the Extended client.

Install the Lgtobbb-[version].rpm package and reinstall the Extendd client

The error “Cannot contact a portmapper on port 7937” indicates that the portmapper service, which is required for the NetWorker Extended Client installation, is not running on the Linux host. The recommended action to resolve this issue is to install the lgtoserv-[version] rpm package and reinstall the Extended client. The other options are not related to this process.

NEW QUESTION 41
A backup administrator has configured Dell EMC Cloud Tier and the NetWorker data movement policy for long-term retention. The save sets are not moved to the Cloud even though cloning ran successfully What is the reason for this issue?

Data movement policy on PowerProtect DD was not running yet

User does not have the Cloud Tier privilege

Data movement will occur only one time per month

Missing replication license on PowerProtect DD

The data movement policy on Dell EMC Cloud Tier is configured to move the save sets to the Cloud only once a month. The cloning of the save sets may have run successfully, but the data movement will still only occur once a month.

NEW QUESTION 42
A backup administrator wants to use an mminfo utility to run a query for several save sets from a NetWorker client running Windows 2019 However, they receive an error that the mminfo executable is not found.
What is the fastest way to resolve this issue?

Install the NetWorker Extended Client package.

Use an nsrinfo utility instead

Open a case with Dell Support

Use a Windows Explorer to find the mminfo.exe file

To use the mminfo utility, the NetWorker Extended Client package must be installed to the Windows 2019 client. This package includes the mminfo executable along with other NetWorker utilities.

NEW QUESTION 43
How should a backup administrator install a virtual CloudBoost appliance on a VMware ESXi host?

Invoke the VMware Update Manager to download the installation package.

Copy a zipped installation package to a Linux VM, and run the setup script

Run an executable installation package

Deploy an OVF template.

NEW QUESTION 44
What is staging used for?

move data to a different storage device

keep both copies online at all times

make and keep a second copy at all times

maintain a longer retention period

NEW QUESTION 45
Which commands can be used to locate the bootstrap SSID on a backup volume?

nstinfo and mminfo

nsrnm and scanner

mminfo and nsrck

scanner and mminfo

The nstinfo and mminfo commands can be used to locate the bootstrap SSID on a backup volume. The other commands are not related to this task.

NEW QUESTION 46
Which virtual environments are supported by NetWorker to back up virtual machines?

KVM and Microsoft Hyper-V

Microsoft Hyper-V and Citrix XEN

VMware and Microsoft Hyper-V

Citrix XEN and VMware

NetWorker supports both VMware and Microsoft Hyper-V virtual environments for backing up virtual machines.

NEW QUESTION 47
A backup administrator has configured the backup of the All save set on a Linux host that contains a remote mount point. During the restore, the administrator did not see the mount point data but only local data What is the reason for this behavior?

The save command did not include the -X option.

NetWorker does not support Linux mount point backup.

Mount point backups require the extended client

The save command did not include the -x option.

NetWorker does not directly support the backup of mount points on Linux systems. To back up the data on the mount points, the remote systems must be added as a client to the NetWorker server and included in the backup.

NEW QUESTION 48
A backup administrator is performing a Block-Based Backup of a RHEL Server and it fails What is the cause of the issue?

PSS is enabled for target Data Domain devices.

The Igtobbb package is not installed.

AFTD device is enabled for Client Direct.

LVM or VxVM are enabled on the OS level.

NEW QUESTION 49
Which URL syntax is correct for NWUI?

https //servemame 9090/nwui

https//servemame 9090/ui

https//servemame 9090

https//servemame 9090/webui

NWUI, or NetWorker User Interface, is a web-based graphical user interface for NetWorker. The URL syntax for NWUI is https://servername:9090/webui, where “servername” is the name of the NetWorker server.

NEW QUESTION 50
A customer recently added a Hyper-V 2016 servers’ farm, and the hosted Virtual Machines need to be backed up. The administrator has already installed a NetWorker client on all Hyper-V hosts.
Which additional component must be installed on the Hyper-V hosts to accomplish this task?

Storage Node

NMDA

NMM

vProxy

NEW QUESTION 51
A NetWorker server is utilizing a remote storage node. There is a PowerProtect DD appliance with two VTLs configured, and it is attached to the storage node via Fiber Channel. There is also a physical media library attached to the same storage node.
How many nsrlcpd processes are running on the storage node?

When a NetWorker server is utilizing a remote storage node, two nsrlcpd processes will be running on the storage node. The first one is responsible for communication between the NetWorker server and the storage node, while the second one is used to communicate with the PowerProtect DD appliance and the physical media library.

NEW QUESTION 52
Which monitoring tool is used to view current device operations, active sessions, messages concerning recent activity, and any pending messages?

NetWorker Character-Based Interface

nsradmin

nsrwatch

Networker WebUser Interface

NEW QUESTION 53
An administrator has been asked to assess the options available from the NetWorker backup application.
The objectives are
Greater efficiency with virtualized and pooled resources
IT resources can be provisioned on-demand and easily returned to the resource pool Quickly allocate computing resources to meet business demands Enhanced security and protection of information assets What should be recommended to the client?

NetWorker Virtual Edition and CloudBoost virtual;

On-prem NetWorker and use CloudBoost Virtual Appliance for long-term retention

On-prem NetWorker with CloudBoost Virtual Appliance to improve recovery time objectives

Complete Data Protection Suite as Infrastructure-as-a-Service

NEW QUESTION 54
What is true of a BMR when using NetWorker?

required when a host encounters a catastrophic failure

restores Linux operating system

restores VM operating system

can be used for recovery of NetWorker server database

A Bare Metal Restore (BMR) using NetWorker is a process that can be used to completely restore the NetWorker server database onto a new server. This process can be used in the event of a catastrophic failure, or when the existing server must be replaced.

NEW QUESTION 55
An administrator wants to use block-based backups on a Windows client. They have already installed the NetWorker client software package on the system Which statement describes the need for an additional NetWorker package to enable Block-based Backup support?

NetWorker Block-based Backup software is required.

Logical Volume Manager is required.

No additional software is required.

NetWorker Extended Client software is required.

To enable Block-based Backup support on a Windows client, the NetWorker Extended Client software package must be installed in addition to the NetWorker Client software package.

Loading …

EMC DES-3128 exam is a comprehensive test that covers a wide range of topics related to NetWorker implementation. DES-3128 exam tests the candidate’s understanding of the NetWorker architecture, backup and recovery operations, network and storage protocols, and performance tuning. It also covers the integration of NetWorker with other EMC products, such as Data Domain, Avamar, and Isilon.

DES-3128 Dumps PDF – DES-3128 Real Exam Questions Answers: https://www.examdumpsvce.com/DES-3128-valid-exam-dumps.html