1Z0-1048-21 Dumps for Pass Guaranteed – Pass 1Z0-1048-21 Exam 2022 [Q13-Q30]

Rate this post

1Z0-1048-21 Dumps for Pass Guaranteed – Pass 1Z0-1048-21 Exam 2022

1Z0-1048-21 Exam Dumps – Try Best 1Z0-1048-21 Exam Questions from Training Expert ExamDumpsVCE

NO.13 Which is not a predefined approval task and task rule for payroll and project costing time entry approvals?

a Payroll Time Card Approval task that automatically approves the time card if the total hours for time entries is 40 hours or less.

a Project Time Card Approval task that routes time cards that contain time entries with a reported project, task, and expenditure type to the appropriate Project Manager

a Payroll Time Card Approval task that routes payroll time entries to the Line Manager if the total hours for a time card exceed 40 hours

a Payroll Time Card Approval taskthat automatically approves the time card unless it contains absences

NO.14 Your customer wants to define a new time card field. Which option includes the complete list of valid data sources?

PVO, Independent value set, dependent value set, table defined value set, subset value set

Independent value set

PVO, independent value set, tabledefined value set

PVO only

NO.15 Your customer wants to route absence entries on time cards usingabsence approval rules, which uses the absence approval task to approve absence entries.
How can you achieve this requirement?

Set up Time Consumer Set with the appropriate option for Absence Approval Routing

Set up Time Categories with the appropriate option for Absence Approval Routing

Set up Time Setup Profile with the appropriate option for Absence Approval Routing

Set up Time Processing Profile with the appropriate option for Absence Approval Routing

Set up Time Card layout with the appropriate option for Absence Approval Routing

NO.16 A senior system designer has asked you to create time consumersets for both Project Costing and Project Execution Management by using the delivered time category of All Projects Entries and for time to be transferred only when approved. How should you achieve this?

This cannot be done because although All Projects Entries can be used for the time category, time cards can be transferred to Project Execution Management only when they are submitted.

You would modify the delivered All Projects Entries time category to contain only absence entries and use this in both time consumer sets. Transferring only on approval is the default behavior for both time consumers.

This cannot be done because only absence entries can be transferred to Project Execution Management and time cards transferred to Project Execution Management are transferred when they are submitted.

This cannot be done because although the time consumer set can be configured to transfer time cards to Project Execution Management only when approved, the time category of All Projects Entries cannot beused.

NO.17 The HCM Groups you have created need to be refreshed nightly to update the group members based on employment changes.
What steps must you configure in order to include the group in the refresh process?

Schedule the “Evaluate HCM Group Membership” process to run nightly.

When configuring the HCM Group, you must select the “include in Refresh All Group Process” and then the group will automatically refresh nightly.

The Evaluate HCM Group Membership can only be configured to run for one group at a time, so you must setup a recurrence for each group to refresh separately nightly.

When Configuring the HCM Group, you must select the “Include in Refresh All Group process” checkbox, and then schedule the “Evaluate HCM Group Membership” process to run nightly.

NO.18 What is the correct sequence of steps and new defined objects required to enable customer-defined messages as an option when defining different time card validation rules?

Define new messaged as CUST_HWM_<message name>, select the new messages when defining a TDR or TER rule, and assign the rule using a rule set and time processing profile.

Define a new Message as CUST_HWM_<message name>, select the new messages when defining a TER rule, and assign the rule using a rule set and time processing profile.

Define a new message as WFM_<message name>, select the new message when defininga TER rule, and assign the rule using a rule set and time processing profile.

Define new messages as HWM_<message name>, select the new messages when defining a TER rule, and assign the rule using a rule set and time processing profile.

NO.19 Which option will not enhance the reusability of a Time Calculation Rule template when defining rules?

Rule Template Definition >Summation Level

Rule Template Outputs > User Defined Output Sources

Rule Template Definition > Time Card Events That Trigger Rule option

Rule Template Parameters > Formula Parameters types

Rule Template Definition > Reporting Level

NO.20 What is the correct sequence of steps that you should perform to set multiple time attributes for different user groups?

Configure the time attributes the rule to the TER Rule Set and then to the worker via the appropriate pro
> Define a custom value set > Define the single-attribute time card field > Assignto a layout set > Assign to the time entry profile.

Configure the time attributes > Define the single-attribute time card field > Assign to the time entry profile.

Configure the time attributes > Define the multiple-attribute time card filed > Assignto the time entry profile.

Configure the time attributes > Define the multiple-attribute time card filed > Assign to a layout set > Assign to the time entry profile.

NO.21 You are managing your team schedule andyou cannot see one of your worker’s schedule. This worker has a work schedule typed as duration. What is causing this?

Duration work schedules are not supported in the Planned and Published Schedules.

The worker’s work schedule is assigned to hisprimary assignment.

Shift short name has not been set for the shifts that composed the worker’s work schedule.

Shift limits have not been set for the shifts that composed the worker’s work schedule.

NO.22 The Generate time cards process is run for an HCM group called “group 1” with the “Available from date” = 1 Jan 2016 and the “Available to date” = 1 March 2016.
Which time cards will be generated?

Time cards for the primary assignment of workers who are active members of “group 1” during the available date range. Only time cards starting on or after 1 Jan 2016 and ending on or before 1 March
2016 will be created. Any existing time cards and data will not be changed.

Time cards for the primary assignment of workers who are active members of “group1” on 1 March
2016. Only time cards starting after 1 Jan 2016 and ending on or before 1 March 2016 will be created.
Any existing time cards and data willnot be changed.

Tine cards for the primary assignment of workers who are active members of “group 1” during the available date range. Only time cards starting on or after 1 Jan 2016 and ending on or before 1 March
2016 will be created. The existing timecards will be replaced.

Time cards for all assignments of workers who are active members of “group 1” during the available date range. Time cards with any date within the range 1 Jan 2016 and 1 March 2016 will be created.
Any existing time cards and data will not be changed.

Time cards for all assignments of workers who are active members of “group 1” during the available date range. Only time cards starting on or after 1 Jan 2016 and ending on or before 1 March 2016 will be created. The existing time cards will be replaced.

Time cards for the primary assignment of workers who are active members of “group 1” during the available date range. Time cards with any date within the range 1 Jan 2016 and 1 March 2016 will be created. Any existing time cards and data will not be changed.

NO.23 A customer requirement is to use the first part (week) of a biweekly time card period for validation purposes.
Which option outlines how this could be accomplished?

Create a new rule template using a delivered TER formula. Enable input parameters in the template to define the validation period and set summation period to “Time Card Level.” Create rules using the new rule template and assign them using a rule set.

Create a new TER formula and rule templates. Define the validation period within the formula. Enable the summation level selection when defining the rule as an input parameter within the rule templates.
Create rules using the new rule templates and assign them using a rule set. Place the “Day Level” rules on Rows 1-7 for days 1-7 in the time card period, and the “Time Card Level” Rule in the 8th row. Use the Processing Sequence to order the rules.

Create a new rule template using a delivered TER formula. Enable input parameters in the template to define the validation period and set the summation period to “Day Level.” Create rules using the new rule template and assign them using a rule set.

Create a new TER formula and rule template. Define the validation period within the formula. Set the summation period to “Time Card Level” in the rule template and enable the input parameters. Create rules using the new rule template and assign them using a rule set.

NO.24 You need to easily identify and copy time card data while managing time cards.
Which action can use in the Favorite Time Cards feature to accomplish this?

recalculate for retroactive changes

process time cards for mass approval

delete a current time card

create or complete your current time card

NO.25 You need to create an HCM group of workers that have the same value stored in their People Group field.
Howshould you define the HCM group?

Select a delivered value set in the Group Eligibility section.

Select a specific People Group Segment in the Group Eligibility section on the page,

Select a People Group from the list of Additional Employment Attributes in the Group Eligibility section.

This cannot be done.

Define a customer-defined value set and select from the Include Group section on the page.

NO.26 Your customer has asked you to enable a group of workers to change any entered, saved, or submitted time cards up to five days before the current date.
Where should you enable this access in the system?

This is not possible.

You would use the Manage Time Layout Sets task to configure when workers can create, view, edit, and delete time cards.

You would use the Manage Repeating Time Periods task to configure when workers can create, view, edit, and delete time cards.

You would use the ManageWorker Time Entry Profiles task to configure when workers can create, view, edit, and delete time cards.

NO.27 While configuring a time calculation rule template, what rule classification options are available the sub-type purpose of the template?

Distribution Rule, Shift Premium, Threshold, WeeklyPremium, Work Time Directive, Variance

Distribution Rule, Meal or Break, Rounding, Shift Premium, Threshold, Weekly Premium

Distribution Rule, Meal or Break, Shift Premium, Threshold, Weekly Premium, Variance

Distribution Rule, Meal or Break, Rounding, Shift Premium, Threshold, Work Time Directive

NO.28 How should you configure Time and Labor Approvals to route to multiple approvers so that if a Payroll Layout time card only contains regular hours, it routes to the Line Manager, but if the time card contains an absence, it can also route to an HR admin?

This is not possible.

You should use the BPM Worklist and modify the BPM task: AbsencesApprovalsTask.

You should use the BPM Worklist and modify the Payroll Time Card Approval – > BPM task:
TimecardApproval.

You should use the BPM Worklist and modify the Project Time Card Approval – > BPM task:
ProjectTimecardApproval.

You should use the BPM Worklist and modify the Payroll Time Card Approval – > BPM task:
TimecardApproval and BPM Worklist, andmodify the BPM task: AbsencesApprovalsTask.

NO.29 A customer defines work schedules by using both elapsed and time-based shifts. How should you configure the Time and Labor time entry layout so that it properly shows the scheduled absences on the time card?

The time entry layout must include start and stop times along with the hidden Absence Plan time attribute and the displayed absence values.

The time entry layout must be part of a layout set that is configured by using the Absence Management Time Consumer template.

The time entry layout must include start and stop times along with the required assignment, in addition to a time card field for the absence values.

Absence entries can be entered only by suing the Calendar Entry layout in the layout set.

The time entry layout must contain the delivered, but hidden Schedule time attributes time card field.

NO.30 How should you disablethe Delete button for an employee after their time card has been submitted?

by specifying the Time Entry Actions Allowed on the Security Task Profile

by specifying the Time Entry Actions Allowed on the Time Entry Processing Profile

by specifyingthe Time Entry Actions Allowed on the Worker Time Entry Setup Profile

by specifying the Time Entry Actions Allowed on the Time Card Layout

Latest 100% Passing Guarantee – Brilliant 1Z0-1048-21 Exam Questions PDF: https://www.examdumpsvce.com/1Z0-1048-21-valid-exam-dumps.html

Exam Dumps VCE

1Z0-1048-21 Dumps for Pass Guaranteed – Pass 1Z0-1048-21 Exam 2022 [Q13-Q30]

Leave a Reply Cancel reply