[May-2022] 301a Exam Dumps – Free Demo & 365 Day Updates [Q59-Q80]

Rate this post

[May-2022] 301a Exam Dumps – Free Demo & 365 Day Updates

Free Sales Ending Soon – Use Real 301a PDF Questions

Average Salary of F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam Certified Professionals

The average salary of a AI-900: Microsoft Azure AI Fundamentals Exam Outlook and Modules Exam Certified Expert in:

United State – 110,500 USD
England – 60,500 POUND
India – 9,71,117 INR
Europe – 95,500 EURO

How to book the F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam

Register or log in on F5 Network website, or visit the Candidate Portal, or contact F5 Certification for more information.

Introduction to F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam

The eligible applicant is capable of using TMOS-based systems that have already been developed on a daily basis. They may also perform simple troubleshooting on a TMOS-based system in order to provide senior engineers and/or F5 Support with full, correct, and relevant details.

They are capable of completing all of the following tasks without assistance:

Able to use different paths to connect and control the BIG-IP (management IP, Self IP)
Open a help case and use online tools like AskF5, F5 iHealth, and DevCentral to learn about HTTP, ClientSSL, ServerSSL, TCP, UDP, and persistence profiles.
On the platform, execute information administration tasks (for example, capable of performing upgrades and licensing).
Use the GUI to perform administrative tasks – Recognize the differences and relationships among virtual servers, virtual server forms, virtual addresses, pools, pool participants, nodes, profiles, iRules, and address translation (NAT/SNAT).

NEW QUESTION 59
A new iRule needs to be tested. The LTM Specialist needs to measure page load times and monitor potential changes in memory usage A load test is scheduled.
Which two features should the LTM Specialist use to monitor these requirements? (Choose two.)

Tmsh show memory

Analytics

Tmsh show sys proc-info

Tmsh show sys provision
Explanation
Need to detect memory changes in real time, use to Page load times with Analytics profile

NEW QUESTION 60
An TLM Specialist needs to configure a virtual server to terminate SSL connection on the LTM device.
Cryptographic information must be re-authorized for SSL sessions that remain open for longer than 30 seconds.
Which settings should the LTM Specialist configure in the client SSL profile?

set the Handshake Timeout to 30 seconds

enable Require Peer SN1 Support

set the Renegotiate Period to 30 seconds

set the Renegotiate Max Record Delay to 30

NEW QUESTION 61
An LTM Specialist needs to force only FTP traffic, sourced from subnet 10.10.10.0/24 to virtual server 10.10.20.1 to the new FTP1 server. The following virtual servers are configured on the LTM device:
Traffic sourced from 10.10.10/24 must use the specific pool member for load balancing.
Which configuration change is needed to meet the requirements?

Create a new virtual server for traffic sourced from 10.10.10.0/24 on port 80 that is destined to 10.10.20.1/32, and create a new pool has only the pool member FTP1 defined.

Add FTP1 to the pool assigned to the MyVS4 virtual server, and remove all other pool members from the pool.

Create a new virtual server for traffic sourced from 10.10.10.0/24 on traffic sourced from 10.10.10./24 on port 21 that is destined to 10.10.20.1/32, and create a new pool that has only the pool member FTP1 defined.

Add FTP1 to the pool assigned to the MyVS2 virtual server, and remove all other pool member from the pool.

NEW QUESTION 62
An LTM Specialist has recently taken over administration or an LTM device that has experienced resource availability issues. The LTM device will need to be solely used for load balancing and SSL offload. Previously, the LTM device was also used to provide statistical analysis of application traffic. However, that functionality has been moved to a third party solution.
Based on the output below, which configuration change should be made to ensure the LTM module receives the most amount of resources?

Provision AVR to Minimum. Provision LTM at Maximum

Provision AVR to none. Provision LTM to Dedicated

Provision AVR to Minimum, Provision LTM to Dedicated

Provision LTM to Dedicated, Provision AVR to Dedicated

NEW QUESTION 63
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
When the server is unavailable, it will send an HTTP status code of 200 in response to a request for the status html page.
When the server is available. I will send and HTTP status code of 201 in response to a request for the status html page.
When the 200 status code is received, the pool member should receive No new connections.
Which configuration change should be made to meet these requirements?

set the Send String to GET/ status html and the Receive String to 200 and Receive Disable String to 201.

set the Send String to GET Arian and the Receive String to 200 and Receive Disable String to 201.

set the Send String to GET Arian and the Receive Disable String to 200 and Receive String to 201.

set the Send String to Get /status html and the Receive Disable String to 200 and Receive String to 201.

NEW QUESTION 64
An LTM Specialist needs to use the tmsh command to create a pool named http_pool with member
10.10.101:80 on an LTM device.
Which expression should the LTM Specialist use?

# tmsh create pool http_pool members {10.10.10.101:80}

# tmsh create pool http_pool members add {10.10.10.101:80}

# tmsh create it pool http_pool members {10.10.10.101:80}

# tmsh create itm pool http_pool member {10.10.10.101:80}

NEW QUESTION 65
An LTM device load balances a pool of routers. The LTM device needs to verify path availability to an HTTP server with the IP address 192 168.10 10. located beyond the routers.
Which monitor type and parameters arc required?

HTTP monitor alias address 192 168.10 10. and set the alias to port 80

TCP monitor, alias address 192.168.10.10. and set the alias to port 80

TCP monitor change transparent option to Yes. set alias address 192.168.10.10. and set the alias to port 80

TCP monitor, change transparent option to Yes, and sot the alias to port 80

NEW QUESTION 66
An LTM Specialist is configuring a client profile to offload processing a new application Company policy requires that clients can resume session for up to 30 minutes, but must renegotiate a new session after that.
Which setting should the LTM Specialist change to satisfy this requirement?

Renegotiate Max Record Delay

Renegotiation period

Cache size

Cache timeout

NEW QUESTION 67
An ITM Specialist has the configuration shown:

The LTM Specialist needs to create a new virtual server in part B.
Which virtual address(es) should be used for the new virtual server?

10.100.0.1 and.10.120.0.1

10.90.0.1 and 10.12.0.1

10.120.0.1 only

10.90.0.1 and 10.100.0.1

NEW QUESTION 68
An application requires load balancing functionality. The application must be encrypted to the client.
Certain content must be manipulated by the following IRule:

Which set of profiles must be applied to the virtual server?

TCP, HTTP server SSL Stream

TCP, HTTP, Client SSL, Stream

TCP, HTTP, OnceConnect, Stream

Fast L4, HTTP server SSL Stream

NEW QUESTION 69
An application is expected to maintain more than 100,000 concurrent TCP connections to a single pool member.
What is an appropriate SNAT configuration in this situation?

A SNAT pool with 4 IP addresses

SNAT automap enabled

A static SNAT

A SNAT pool with IP address
Explanation
One IP can establish 65,535 connections only the number of snapit’s IP exceeds 100,000. AT least two snaptips are required. Options B, C, and all have only IP, which is obviously not enough

NEW QUESTION 70
An LTM Specialist needs to assign a health monitor to a pool with two pool members 10.10.10 101 and 10.10.10.102 Both pool members are listening on port 8080 with TCP. The health of the application depends on the health of an another server (10 10 10 100) that runs port 9080 with TCP.
Which two custom TCP monitors should be selected as the pool’s health monitors’ (Choose two)

a custom TCP monitor that works on port 9080 with 10.10.10.100 as alias address

a custom TCP monitor that works on port 9080,

a custom TCP monitor that works on port 8080

a custom TCP monitor that works on port 9080 with 10,10.10.101 as alias address

a custom TCP monitor that works on port 8080 with 10.10.10.101 as alias address

a custom TCP monitor that works on port 8080 with 10.10.10.102 is alias address

NEW QUESTION 71
An SSL application is being migrated to the LTM device. Both encrypted and unencrypted traffic are accepted by the server. The virtual server configuration is as follows:

Which LTM device profile should be used on the LTM device to reduce the CPU load on the current.

Protocol

serverssl

clientsssl

stream

NEW QUESTION 72
The web application team requests help from the LTM Specialist to Improve the performance of their web sites that are load balanced by the F5 LTM device with a Standard Virtual Server.
Which virtual server type will improve the performance of the web application servers?

Performance (HTTP)

Performance (Layer 4)

Stateless

Forwarding (IP)

NEW QUESTION 73
Refer to the exhibit

Given the bigip conf extract shown where the servers only talk http on port 80, which node will receive the next user request?

72.10.1.1

10.1.1.1

10.1.1.2 0

10.1.1.3

NEW QUESTION 74
Remote office users are having performance issues with a virtual hosted on the F5 LTM. The LTM Specialist reviews the configuration for the virtual server and determine that some settings are set with default profiles.
Which profile should the LTM Specialist enable to improve virtual server performance?

A WAN optimized client side profile

A FastL4 profile on the virtual server

An HTTP profile for the virtual server

A Stream profile for the remote user networks

NEW QUESTION 75
An LTM Specialist needs to provide statistics regarding the round-trip time between the clients and the servers.
Which metric should be part of the analytics profile to provide that information?

Page Load Time

User Sessions

Max TPS and Throughout

Response Codes

NEW QUESTION 76
A customer wants to select the pool for an application based on information found in the path of the URL.
For example:
http://www.example.com/app 1 should be sent to the app 1 pool
http.//www.exampie.com/app 2 should be sent to the app2 pool
Which two profiles need to be assigned to the virtual server? (Choose two.)

Client SSL

Persistence

TTP Compression

HTTP

TCP

NEW QUESTION 77
An LTM device is configure with the wildcard virtual servers displayed below.
A client connection is made to 172.24.31.14:443.

VS_172_24_1_WILDCARD

VS_HTTP_WILDCARD

VS_172_24_WILDCARD

VS_HTTPS_WILDCARD

NEW QUESTION 78
An LTM Specialist is removing some of the load off an existing cluster by adding a adding a third BIG-IP device to the device group. The new device can deliver twice the performance of the other two devices.
The LTM Specialist needs to make sure that the BIG-IP device with the highest available capacity is always selected to take over a traffic group in the event of a failover.
Which failover method is most appropriate?

Ordered List

Load Aware

HA Group

HA Capacity

NEW QUESTION 79
An LTM Specialist needs to create two virtual servers.
The application has links for both HTTP and HTTPS version of application. The client must be persistence to a pool member, no matter which virtual server is accessed.
What must be selected in the Source Address Affinity persistence profile?

Match across Virtual Servers

Match across Pool Members

Match across Services

Match across Polls

NEW QUESTION 80
An LTM device configured with a management IP address and route and a series of self-IPs and TMM routes. Both management and TMM have a routing entry for 101 10/24 Application traffic is being load balanced and sent to pool member 10.1.1.123 with SNAT Automap and configured.
Which route will the LTM device use?

TMM route regardless of the management port status

both routes, which will duplicate traffic on both management and TMM interface

equal cost multipath load balancing via both routes

management route when TMM interface is down or TMM is offline

management route regardless of the management port status