Exam Dumps VCE

QUESTION 23
A customer needs a low cost block storage array for targeted workloads. The array needs to provide automated tiering, thin provisioning, and snapshot capabilities.
Which HPE storage solution meets the customer requirements?

QUESTION 24
A customer needs to deploy an application on a newly-installed HPE ProLiant server, but they report that the server is not online. They call you for remote support. The IP address on the production network cannot be reached. You are evaluating the probable root causes of this issue.
According to the troubleshooting methodology, what are next two steps? (Select two)

QUESTION 25
A customer has a single ProLiant DL560 Gen 10 running a virtualization system. They want to validate installed firmware components at the hardware level.
Which built-in management tool should they use to complete this task?

QUESTION 26
For which virtualization management products does HPE OneView offer integration plug-ins1? (Select two.)

QUESTION 27
You configured a port on an HPE FiexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs interface Ten-GigabitEthernet 1/0/11 description server ESXiOl-ethl port link-type trunk port trunk permit vlan 50 port trunk permit vlan 2 port trunk pvid vlan 50 Given the configuration above, what should happen to any untagged traffic coming from the VMware ESXI host?

QUESTION 28
When should you choose to populate a server with LRDlMMs?

QUESTION 29
Match the characteristic to the correct HPE ProLiant family.

QUESTION 30
A customer requests a quote for an HPE storage solution that meets these requirements
* fully redundant dual-controller storage array with no single points of failure
* 1 Gb or 10 Gb ISCSI connectivity
* at least four host-facing ISCSI ports
* capable of expanding usable capacity in small increments of one-to-two disks Which HPE storage solution should be proposed?

QUESTION 31
Match the customer requirement to the appropriate HPE storage solution.

QUESTION 32
Which storage array feature records only changes made to the base volume and keeps an earlier state of the original volume?

QUESTION 33
A customer needs a solution for a rack of servers. They need connectivity for 14 HPE DL380 servers, which each have two 10-GBASE-T Ethernet ports, and 10 HPE DL360 servers, which have two 10GBASE-X SFP+ Ethernet ports.
They need switch redundancy for each server and want to connect all servers to the same switch stack. The client also needs a 400 Gb backbone connection to the data center core switch from the solution you are creating.
Which architecture meets the customer requirements?

QUESTION 34
Match the speed and protocol with the appropriate component.

QUESTION 35
An administrator deployed a new FlexFabric switch Into the environment and wants to collect baseline information from the switch The administrator wants to be able to use this in case there is any question from support should the administrator open a case.
Which command can the administrator use to collect support information from the switch?

QUESTION 36
You need to create a dynamic bridge-aggregation group on a FlexFabric switch to ensure the ports are automatically configured with the applicable bridge-aggregation interface configuration Drag the steps on the left Into their appropriate order in the answer area on the right.

QUESTION 37
A customer needs to update a server’s firmware using the latest Support Pack for ProLiant (SPP). They use a bootable USB flash drive to do so, and they select Interactive Mode on boot. Once the device boots, they are unsure how to proceed and ask for your assistance.
What can you tell them to do to easily update the firmware?

QUESTION 38
Which HPE MSA storage feature enables tuning the tier-migration algorithm for a virtual volume when creating or modifying the volume?

QUESTION 39
Which feature in a block storage array is effective in decreasing the size of blocks?

QUESTION 40
You are configuring an MSA 2052 for one of your customers in OCA.
Click on either one of the two places on the Bill of Materials screen that will enable you to verify the configuration and get details on any errors.

QUESTION 41
An administrator has two switches connected with a single link. The administrator observes that, during hours of peak activity, the storage traffic tends to consume the link. The link is shared with other types of traffic that is time sensitive.
What technology can the administrator use to help alleviate the situation while they are working towards a long-term solution?