[Q29-Q49] Free HPE7-A07 Exam Files Downloaded Instantly UPDATED [2026]

Rate this post

Free HPE7-A07 Exam Files Downloaded Instantly UPDATED [2026]

100% Pass Guaranteed Free HPE7-A07 Exam Dumps

HP HPE7-A07 Exam Syllabus Topics:

Topic	Details
Topic 1	WLAN: This HP HPE7-A07 exam topic tests the ability of a senior RF network engineer to design and troubleshoot RF attributes and wireless functions. It also includes building and troubleshooting wireless configurations, critical for optimizing WLAN performance in enterprise environments.
Topic 2	Network Stack: This topic of the HP HPE7-A07 exam evaluates the ability of a senior HP RF network engineer to analyze and troubleshoot network solutions based on customer issues. Mastery of this ensures effective problem resolution in complex network environments.
Topic 3	Troubleshooting: This topic of the HP HPE7-A07 exam assesses skills of a senior HP RF network engineer in troubleshooting. It also assesses the ability to remediate issues in campus networks. It is vital for ensuring network reliability and minimizing downtime in critical environments.
Topic 4	Routing: This Aruba Certified Campus Access Mobility Expert Written exam section measures the ability to design and troubleshoot routing topologies and functions, ensuring that data efficiently navigates through complex networks, a key skill for HP solutions architects.
Topic 5	Network Resiliency and Virtualization: This section of the Aruba Certified Campus Access Mobility Expert Written exam assesses the expertise of a senior HP RF network engineer in designing and troubleshooting mechanisms for resiliency, redundancy, and fault tolerance. It is crucial for maintaining uninterrupted network services.
Topic 6	Security: This topic evaluates the ability of a senior HP RF network engineer to design and troubleshoot security implementations, focusing on wireless SSID with EAP-TLS and GBP. It ensures the network is secure from unauthorized access and threats.
Topic 7	Authentication Authorization: Senior HP RF network engineers are tested on their skills in designing and troubleshooting AAA configurations, including ClearPass integration. This ensures that network access is securely managed according to the customer’s requirements.
Topic 8	Connectivity: The topic covers developing configurations, applying advanced networking technologies, and identifying design flaws. It tests the skills of a senior HP RF network engineer in creating reliable, high-performing networks tailored to specific customer needs.
Topic 9	Performance Optimization: The Aruba Certified Campus Access Mobility Expert Written exam focuses on analyzing and remediating performance issues within a network. It measures the ability of a senior RF network engineer to fine-tune network operations for maximum efficiency and speed.

NEW QUESTION 29
The wireless administrator for a college campus is gelling reports of connectivity issues when students are working outdoors.

Reviewing the settings above, watch change is needed to align with best practices?

Disable 802 11r.

Disable 802 11k.

increase 5Gnz TX power range Min/Max.

increase 5 GHz wireless coverage tuning to Aggressive.

NEW QUESTION 30
A customer is evaluating device profiles on a CX 6300 switch. The test device has the following attribute:
* MAC address = 81:cd:93:13:ab:31
The test device needs to be assigned the “iot-prod” role. In addition, the “iot-default” role must be applied for any other device connected to interface 1/1/1.
This is a lab environment with no configuration of any external authentication server for the test.

Given the configuration example, what is required to meet this testing requirement?

Enter the command port-access onboarding-method precedence to set device profiles with a higher precedence

Enter the command port-access device-profile mode block-until-profile-applied globally

Enter the command port-access fallback-role iot-default globally

Enter the command port-access onboarding-method precedence to set device profiles with a lower precedence

NEW QUESTION 31

A university runs its own TV station in the city. The IT department deploys a multimedia server so the TV productions can be sent out to the entire campus over the IP network using multicast-based communications.
In order to improve the bandwidth consumption, PIM Sparse Mode and IGMP Snooping features are enabled.
When wireless users join the multicast groups, all users connected to the same WLAN experience poor network performance. However, wired users are not affected in this way. While troubleshooting, the network administrator saves the packet captures shown in the exhibit and concludes that all users, even those not joining the multicast group, receive the same multicast flow at slow speeds.
Which features should the network administrator enable to fix the problem?

ARP broadcast conversion into unicast and Multicast Transmission Optimization

Dynamic Multicast Optimization and UCC QoS correction

Dynamic Multicast Optimization and Multicast Transmission Optimization

UCC QoS correction and Multicast Transmission Optimization

NEW QUESTION 32
A customer is running out of IP addresses in a network segment. What will happen if they add an additional IP subnet to the same VLAN?

This would result in a single SVI using two subinterfaces

Users can reach each other and establish PTP traffic without passing an L3 point in the same VLAN

Broadcasts for the two subnets will arrive on all ports in the same VLAN

IGMP will not work in both of the subnets in the same VLAN

NEW QUESTION 33
sw-1 is the master on all VRRP instances. To test the configuration, VLAN 100 was shut on sw-1, and then once the failover occurred, it was brought back up.
What is the expected outcome?

sw-1 will be the master for all three VRRP instances.

sw-1 will only be the master for VRRP 200 and VRRP 300.

sw-2 will only be the master for VRRP 200 and VRRP 300.

sw-2 will be the master for all three VRRP instances.

NEW QUESTION 34
Exhibit.

A customer is reporting mat connectivity is Tailing for some wireless client Devices. What are your conclusions from the capture? (Select two.)

The client does not have an ARP entry for me default gateway.

The network is using WPA2-PSK key management.

The network is using WPA3-SAE key management.

The client is not receiving an IP address.

The client does not support beamforming.

NEW QUESTION 35
Exhibit.

An engineer has applied the above configuration to R1 and R2 However the routers OSPF adjacency never progresses past the “EXSTART-DR” slate as shown below.

Which configuration action on either router will allow R1 and R2 to progress past the “EXSTART/DR” state?

Change R1 and R2 to a network type of point-to-point.

Remove the layer 3 MTU configuration.

Ensure the OSPF process is not configured with passive-interface default.

Change the IP address and mask applied to interface 1/1/1.

NEW QUESTION 36
A customer has recently deployed a wireless system using AP-535S to provide connectivity for their employees who are responsible tor uploading large video files for review. The customer wants to use features that provide throughput gains for large data uploads.
Which feature can be enabled to meet the requirement and simultaneously allow spatially separated clients access to the channel?

Ul-TXBF

OFOMA

DL MU-MIMO

UL MU-MIMO

NEW QUESTION 37
A customer has deployed an AOS 10 mobility gateway cluster consisting of three controllers at a single site The WLAN is configured to tunnel wireless device traffic to the AOS 10 mobility cluster The clients are authenticated by ClearPass using WPA3-Enterprise (opmode wpa3-aes-ccm-128). The security team has requested the ability to force a wireless device to reauthenticate using ClearPass.
Which steps are required to ensure ClearPass can consistently initiate a change of authorization against an AOS 10 mobility cluster, including during gateway failover scenarios? (Select two)

set cluster mode to Auto Site under High Availability – Cluster configuration

modify WLAN – SSID – VLAN – Mode Configuration

enable manual cluster configuration under High Availability – Cluster Configuration

enable Dynamic Authorization CoA under High Availability – Cluster Configuration

modify NAS IPv4 address under Security – Advanced – RADIUS Client

NEW QUESTION 38
Which statement about the AOS-CX VOQ feature is true?

It enhances local prioritization of datagrams marked with priority code points

It provides ingress buffers with queues for each egress port to reduce risk of dropped packets

It optimizes LACP uplinks that connect to multi-chassis VSX LAGs

It dynamically allocates extra buffer space to egress queues to reduce the potential of dropped packets

NEW QUESTION 39
The ACME company has an AOS-CX 6200 switch stack with an uplink oversubscription ratio of 9.6:1. They are considering adding two more nodes to the stack without adding any additional uplinks due to cabling constraints One oftheir architects has expressed concerns that their critical UDP traffic from both wired and bridged AP clients will encounter packet drops.They have already applied the following configuration:

Which strategy will complement this solution to achieve their objective?

edge mark lower priority TCP traffic with AF12

edge mark critical UDP Traffic with CSS

edge mark lower priority TCP traffic with AF11

edge mark critical UDP traffic with AF42

NEW QUESTION 40
A network technician racked up two 9240 mobility gateways in a single cluster that will be terminating 1700 APs in a medium-sized branch office Next, the technician cabled the gateways with two SFP28 Direct Attach Copper (DAC) cables, distributed between a two-member core switching stack and powered them up.
What must the network administrator do next regarding the gateway configuration to ensure maximum wired bandwidth utilization?

Map two physical ports to a port channel on each gateway.

Make an ports trunk interfaces and permit data VLANs

Disable the spanning tree and allocate unique VLANs to each port.

Manually set 25Gbps speeds on all ports.

NEW QUESTION 41
Match each Group Based Policy (GBP) role description to its respective role ID.

NEW QUESTION 42
A customer with a gateway connected to a device on gigabitethernet 0/0/3 configures an Asset ID TLV on the device for inventory management.
Refer to the exhibit.

The customer mentions the Asset ID is not shown. What is causing the issue?

MTU size is too small.

Unknown TLVs cannot be displayed.

LLDP-MED needs to be enabled.

LLDP TX is not enabled.

NEW QUESTION 43
Your customer’s employees connected to a wired network are complaining about a poor user experience. The customer has UXI sensors deployed on their premises. These sensors nave been running for multiple months.
They are testing both the wired network (using the wired Interface of each sensor) and the wireless networks.
Your customer used the UXI dashboard to find the reason for the poor userexperience to find more details, the customer asked you to check the packet captures that have been downloaded from the sensors using the UXI dashboard.
From the zip file downloaded from the UXI sensors, you checked the “datagrams” .pcap file, but you were not able to find any issues How can you explain this?

The “datagrams- pcap file only contains me successful tests Failed tests are contained in the
“datagrams-failed” .pcap file

The UXI sensor could not upload the latest test results to the cloud, so the packet capture is outdated

The datagrams captured on the physical Ethernet interface are in a different .pcap file.

The default filers of the packet captures do not allow tailed tests to be captured by the sensor

NEW QUESTION 44

A network administrator attempts to improve multicast traffic flow and performs some packet captures for validation. What can the network administrator conclude from the results?

The data rate increased from 6 Mbps to 300 Mbps because Broadcast Multicast Optimization (BCMCO) was configured.

The type field remains consistent because Dynamic Multicast Optimization (DMO) was configured.

The data rate increased from 6 Mbps to 300 Mbps because Dynamic Multicast Optimization (DMO) was configured.

The capture taken after optimization does not show a packet length because Multicast Transmission Optimization was configured.

NEW QUESTION 45
Exhibit.

Which statement is true given the following CLI output from a CX 6300?

There are no active fabric clients on the CX switch with RD 172.16.10.1

A wired client with IP address 10.203 1.100 is on a remote CX 6300 in the fabric with loopback IP address 172.21.11.2.

A wired client with IP address 10 203 1 100 has a host route that is not being properly advertised

The overlay loopbacK addresses are advertised in the faerie with 2d-bit subnet masks

NEW QUESTION 46
Which option shows the correct Banawidth Control for 1024 kbpsdown and 2048 Kops up for the SSID?

NEW QUESTION 47
An administrator is creating a fabric withNetConductor in HPE Aruba Networking Central Considering an EVPN VXLAN fabric, click on the most appropriate layer to be configured as a Rome-Reflector Persona.

NEW QUESTION 48
A customer is planning to add loT devices that connect wirelessly to the existing 802.1X SSlD. The customer will use ClearPass to authenticate the IoT devices by MAC address but other devices will still need to authenticate by only 802 1X Exhibit.

The customer provided the current configuration and reported their non-loT 802. IX devices are no longer able to connect. Which configuration change can be made to fix the issue?

Modify opmode wpa3-aes-gcm-256 to opmode wpa2-aes

Add i2-autn-fairtnrougn to the WLAN configuration

Remove mac-authentication from the WLAN configuration

Modify max-authentication failures to 0.

NEW QUESTION 49
The ACME company has an AOS-CX 6200 VSF switch slack with an uplink over subscription ratio of 9.6:1.
They have indicated that their low-priority TCP traffic has been flagged with a DSCP marking coloring them yellow.
Refer to the exhibit.

They are considering adding two more nodes to the stack without adding any additional uplinks due to existing wiring constraints. One of their architects has suggested adding the following configuration:

What would be the impact of applying the acmethreshold profile as shown? (Select two.)