100% Free Professional-Cloud-Network-Engineer Exam Dumps to Pass Exam Easily from ExamDumpsVCE [Q64-Q86]

Rate this post

100% Free Professional-Cloud-Network-Engineer Exam Dumps to Pass Exam Easily from ExamDumpsVCE

Free Professional-Cloud-Network-Engineer Exam Questions Professional-Cloud-Network-Engineer Actual Free Exam Questions

Achieving the Google Professional-Cloud-Network-Engineer certification demonstrates a candidate’s expertise and ability to design and implement network solutions on the Google Cloud Platform. Google Cloud Certified – Professional Cloud Network Engineer certification is recognized by employers and industry experts as a valuable credential that validates a candidate’s skills and knowledge in networking technologies. Certified professionals are equipped with the tools and knowledge required to design, implement, and manage network solutions on the Google Cloud Platform, making them highly sought after by organizations looking to leverage the power of the cloud for their networking needs.

Introduction to Google Professional Cloud Network Engineer Exam

Google Professional Cloud Network Engineer Exam is a certification exam that is conducted by Google to validates candidate knowledge and skills of working as a Professional Cloud network engineer in the IT industry.

After passing this exam, candidates get a certificate from Google that helps them to demonstrate their proficiency in Google Professional Cloud Network Engineer to their clients and employers.

Q64. You have ordered Dedicated Interconnect in the GCP Console and need to give the Letter of Authorization/ Connecting Facility Assignment (LOA-CFA) to your cross-connect provider to complete the physical connection.
Which two actions can accomplish this? (Choose two.)

Open a Cloud Support ticket under the Cloud Interconnect category.

Download the LOA-CFA from the Hybrid Connectivity section of the GCP Console.

Run gcloud compute interconnects describe <interconnect>.

Check the email for the account of the NOC contact that you specified during the ordering process.

Contact your cross-connect provider and inform them that Google automatically sent the LOA/CFA to them via email, and to complete the connection.

Q65. You have a storage bucket that contains two objects. Cloud CDN is enabled on the bucket, and both objects have been successfully cached. Now you want to make sure that one of the two objects will not be cached anymore, and will always be served to the internet directly from the origin.
What should you do?

Ensure that the object you don’t want to be cached anymore is not shared publicly.

Create a new storage bucket, and move the object you don’t want to be checked anymore inside it. Then edit the bucket setting and enable the privateattribute.

Add an appropriate lifecycle rule on the storage bucket containing the two objects.

Add a Cache-Controlentry with value private to the metadata of the object you don’t want to be cached anymore. Invalidate all the previously cached copies.

Q66. You have recently been put in charge of managing identity and access management for your organization. You have several projects and want to use scripting and automation wherever possible. You want to grant the editor role to a project member.
Which two methods can you use to accomplish this? (Choose two.)

GetIamPolicy() via REST API

setIamPolicy() via REST API

gcloud pubsub add-iam-policy-binding Sprojectname –member user:Susername –role roles/editor

gcloud projects add-iam-policy-binding Sprojectname –member user:Susername –role roles/editor

Enter an email address in the Add members field, and select the desired role from the drop-down menu in the GCP Console.

Q67. You need to give each member of your network operations team least-privilege access to create, modify, and delete Cloud Interconnect VLAN attachments.
What should you do?

Assign each user the editor role.

Assign each user the compute.networkAdmin role.

Give each user the following permissions only: compute.interconnectAttachments.create, compute.interconnectAttachments.get.

Give each user the following permissions only: compute.interconnectAttachments.create, compute.interconnectAttachments.get, compute.routers.create, compute.routers.get, compute.routers.update.

Q68. You want to deploy a VPN Gateway to connect your on-premises network to GCP. You are using a non BGP- capable on-premises VPN device. You want to minimize downtime and operational overhead when your network grows. The device supports only IKEv2, and you want to follow Google-recommended practices.
What should you do?

* Create a Cloud VPN instance.
* Create a policy-based VPN tunnel per subnet.
* Configure the appropriate local and remote traffic selectors to match your local and remote networks.
* Create the appropriate static routes.

* Create a Cloud VPN instance.
* Create a policy-based VPN tunnel.
* Configure the appropriate local and remote traffic selectors to match your local and remote networks.
* Configure the appropriate static routes.

* Create a Cloud VPN instance.
* Create a route-based VPN tunnel.
* Configure the appropriate local and remote traffic selectors to match your local and remote networks.
* Configure the appropriate static routes.

* Create a Cloud VPN instance.
* Create a route-based VPN tunnel.
* Configure the appropriate local and remote traffic selectors to 0.0.0.0/0.
* Configure the appropriate static routes.

Q69. You want to apply a new Cloud Armor policy to an application that is deployed in Google Kubernetes Engine (GKE). You want to find out which target to use for your Cloud Armor policy.
Which GKE resource should you use?

GKE Node

GKE Pod

GKE Cluster

GKE Ingress

Q70. In your company, two departments with separate GCP projects (code-dev and data-dev) in the same organization need to allow full cross-communication between all of their virtual machines in GCP. Each department has one VPC in its project and wants full control over their network. Neither department intends to recreate its existing computing resources. You want to implement a solution that minimizes cost.
Which two steps should you take? (Choose two.)

Connect both projects using Cloud VPN.

Connect the VPCs in project code-dev and data-dev using VPC Network Peering.

Enable Shared VPC in one project (e. g., code-dev), and make the second project (e. g., data-dev) a service project.

Enable firewall rules to allow all ingress traffic from all subnets of project code-dev to all instances in project data-dev, and vice versa.

Create a route in the code-dev project to the destination prefixes in project data-dev and use nexthop as the default gateway, and vice versa.

Q71. You need to configure a static route to an on-premises resource behind a Cloud VPN gateway that is configured for policy-based routing using the gcloud command.
Which next hop should you choose?

The default internet gateway

The IP address of the Cloud VPN gateway

The name and region of the Cloud VPN tunnel

The IP address of the instance on the remote side of the VPN tunnel

Q72. You have the networking configuration shown. In the diagram Two VLAN attachments associated With two Dedicated Interconnect connections terminate on the same Cloud Router (mycloudrouter). The Interconnect connections terminate on two separate on-premises routers. You advertise the same prefixes from the Border Gateway Protocol (BOP) sessions associated with each Of the VLAN attachments.
You notice an asymmetric traffic flow between the two Interconnect connections. Which of the following actions should you take to troubleshoot the asymmetric traffic flow?

From the Google Cloud console, navigate to the Hybrid Connectivity select the Cloud Router, and view BGP sessions.

From the Cloud CLI, run gcloud compute -protect_ID router get-status mycloudrouter –region REGION and review the results.

From the Google Cloud console, navigate to Cloud Logging to view VPC Flow Logs and review the results

From the Cloud CLI. run gcloud compute routers describe mycloudrouter

Q73. After a network change window one of your company’s applications stops working. The application uses an on-premises database server that no longer receives any traffic from the application. The database server IP address is 10.2.1.25. You examine the change request, and the only change is that 3 additional VPC subnets were created. The new VPC subnets created are 10.1.0.0/16, 10.2.0.0/16, and 10.3.1.0/24/ The on-premises router is advertising 10.0.0.0/8.
What is the most likely cause of this problem?

The more specific VPC subnet route is taking priority.

The less specific VPC subnet route is taking priority.

A cloud firewall rule that blocks traffic to the on-premises database server was created during the change.

The on-premises router is not advertising a route for the database server.

Q74. You want to create a service in GCP using IPv6.
What should you do?

Create the instance with the designated IPv6 address.

Configure a TCP Proxy with the designated IPv6 address.

Configure a global load balancer with the designated IPv6 address.

Configure an internal load balancer with the designated IPv6 address.

Q75. Your company is planning a migration to Google Kubernetes Engine. Your application team informed you that they require a minimum of 60 Pods per node and a maximum of 100 Pods per node Which Pod per node CIDR range should you use?

/24

/25

/26

/28

Q76. Your on-premises data center has 2 routers connected to your GCP through a VPN on each router. All applications are working correctly; however, all of the traffic is passing across a single VPN instead of being load-balanced across the 2 connections as desired.
During troubleshooting you find:
* Each on-premises router is configured with the same ASN.
* Each on-premises router is configured with the same routes and priorities.
* Both on-premises routers are configured with a VPN connected to a single Cloud Router.
* The VPN logs have no-proposal-chosen lines when the VPNs are connecting.
* BGP session is not established between one on-premises router and the Cloud Router.
What is the most likely cause of this problem?

One of the VPN sessions is configured incorrectly.

A firewall is blocking the traffic across the second VPN connection.

You do not have a load balancer to load-balance the network traffic.

BGP sessions are not established between both on-premises routers and the Cloud Router.

Q77. Your company has separate Virtual Private Cloud (VPC) networks in a single region for two departments: Sales and Finance. The Sales department’s VPC network already has connectivity to on-premises locations using HA VPN, and you have confirmed that the subnet ranges do not overlap. You plan to peer both VPC networks to use the same HA tunnels for on-premises connectivity, while providing internet connectivity for the Google Cloud workloads through Cloud NAT. Internet access from the on-premises locations should not flow through Google Cloud. You need to propagate all routes between the Finance department and on-premises locations. What should you do?

Peer the two VPCs, and use the default configuration for the Cloud Routers.

Peer the two VPCs, and use Cloud Router’s custom route advertisements to announce the peered VPC network ranges to the on-premises locations.

Peer the two VPCs. Configure VPC Network Peering to export custom routes from Sales and import custom routes on Finance’s VPC network. Use Cloud Router’s custom route advertisements to announce a default route to the on-premises locations.

Q78. You are configuring load balancing for a standard three-tier (web, application, and database) application. You have configured an external HTTP(S) load balancer for the web servers. You need to configure load balancing for the application tier of servers. What should you do?

Configure a forwarding rule on the existing load balancer for the application tier.

Configure equal cost multi-path routing on the application servers.

Configure a new internal HTTP(S) load balancer for the application tier.

Configure a URL map on the existing load balancer to route traffic to the application tier.

Q79. Your on-premises data center has 2 routers connected to your Google Cloud environment through a VPN on each router. All applications are working correctly; however, all of the traffic is passing across a single VPN instead of being load-balanced across the 2 connections as desired.
During troubleshooting you find:
* Each on-premises router is configured with a unique ASN.
* Each on-premises router is configured with the same routes and priorities.
* Both on-premises routers are configured with a VPN connected to a single Cloud Router.
* BGP sessions are established between both on-premises routers and the Cloud Router.
* Only 1 of the on-premises router’s routes are being added to the routing table.
What is the most likely cause of this problem?

The on-premises routers are configured with the same routes.

A firewall is blocking the traffic across the second VPN connection.

You do not have a load balancer to load-balance the network traffic.

The ASNs being used on the on-premises routers are different.

Q80. Refer to the exhibit.
You have the following firewall ruleset applied to all instances in your Virtual Private Cloud (VPC):

You need to update the firewall rule to add the following rule to the ruleset:

You are using a new user account. You must assign the appropriate identity and Access Management (IAM) user roles to this new user account before updating the firewall rule. The new user account must be able to apply the update and view firewall logs. What should you do?

Assign the compute.securityAdmin and logging.viewer rule to the new user account. Apply the new firewall rule with a priority of 50.

Assign the compute.securityAdmin and logging.bucketWriter role to the new user account. Apply the new firewall rule with a priority of 150.

Assign the compute.orgSecurityPolicyAdmin and logging.viewer role to the new user account. Apply the new firewall rule with a priority of 50.

Assign the compute.orgSecurityPolicyAdmin and logging.bucketWriter role to the new user account. Apply the new firewall rule with a priority of 150.

Q81. You are using the gcloud command line tool to create a new custom role in a project by coping a predefined role. You receive this error message:
INVALID_ARGUMENT: Permission resourcemanager.projects.list is not valid What should you do?

Add the resourcemanager.projects.get permission, and try again.

Try again with a different role with a new name but the same permissions.

Remove the resourcemanager.projects.list permission, and try again.

Add the resourcemanager.projects.setIamPolicy permission, and try again.

Q82. You are responsible for configuring firewall policies for your company in Google Cloud. Your security team has a strict set of requirements that must be met to configure firewall rules.
Always allow Secure Shell (SSH) from your corporate IP address.
Restrict SSH access from all other IP addresses.
There are multiple projects and VPCs in your Google Cloud organization. You need to ensure that other VPC firewall rules cannot bypass the security team’s requirements. What should you do?

Configure a hierarchical firewall policy to the organization node to allow TCP port 22 for your corporate IP address with priority 0.
Configure a hierarchical firewall policy to the organization node to deny TCP port 22 for all IP addresses with priority 1.

Configure a VPC firewall rule to allow TCP port 22 for your corporate IP address with priority 0.
Configure a VPC firewall rule to deny TCP port 22 for all IP addresses with priority 1.

Configure a VPC firewall rule to allow TCP port 22 for your corporate IP address with priority 1.
Configure a VPC firewall rule to deny TCP port 22 for all IP addresses with priority 0.

Configure a hierarchical firewall policy to the organization node to allow TCP port 22 for your corporate IP address with priority 1 Configure a hierarchical firewall policy to the organization node to deny TCP port 22 for all IP addresses with priority 0.

Q83. You created a new VPC for your development team. You want to allow access to the resources in this VPC via SSH only.
How should you configure your firewall rules?

Create two firewall rules: one to block all traffic with priority 0, and another to allow port 22 with priority 1000.

Create two firewall rules: one to block all traffic with priority 65536, and another to allow port 3389 with priority 1000.

Create a single firewall rule to allow port 22 with priority 1000.

Create a single firewall rule to allow port 3389 with priority 1000.

Q84. You have the networking configuration shown In the diagram Two VLAN attachments associated With two Dedicated Interconnect connections terminate on the same Cloud Router (mycloudrouter). The Interconnect connections terminate on two separate on-premises routers. You advertise the same prefixes from the Border Gateway Protocol (BOP) sessions associated With each Of the VLAN attachments.
You notice an asymmetric traffic flow between the two Interconnect connections. Which of the following actions should you take to troubleshoot the asymmetric traffic flow?

From the Google Cloud console, navigate to the Hybrid Connectivity select the Cloud Router, and view BGP sessions.

From the Cloud CLI, run gcloud compute -protect_ID router get-status mycloudrouter –region REGION and review the results.

From the Google Cloud console, navigate to Cloud Logging to view VPC Flow Logs and review the results

From the Cloud CLI. run gcloud compute routers describe mycloudrouter –region REGION and review the results

Q85. Your on-premises data center has 2 routers connected to your Google Cloud environment through a VPN on each router. All applications are working correctly; however, all of the traffic is passing across a single VPN instead of being load-balanced across the 2 connections as desired.
During troubleshooting you find:
* Each on-premises router is configured with a unique ASN.
* Each on-premises router is configured with the same routes and priorities.
* Both on-premises routers are configured with a VPN connected to a single Cloud Router.
* BGP sessions are established between both on-premises routers and the Cloud Router.
* Only 1 of the on-premises router’s routes are being added to the routing table.
What is the most likely cause of this problem?

The on-premises routers are configured with the same routes.

A firewall is blocking the traffic across the second VPN connection.

You do not have a load balancer to load-balance the network traffic.

The ASNs being used on the on-premises routers are different.

Q86. Your on-premises data center has 2 routers connected to your Google Cloud environment through a VPN on each router. All applications are working correctly; however, all of the traffic is passing across a single VPN instead of being load-balanced across the 2 connections as desired.
During troubleshooting you find:
– Each on-premises router is configured with a unique ASN. ?Each on-
premises router is configured with the same routes and priorities.
– Both on-premises routers are configured with a VPN connected to a
single Cloud Router.
– BGP sessions are established between both on-premises routers and the Cloud Router.
– Only 1 of the on-premises router’s routes are being added to the
routing table.
What is the most likely cause of this problem?

The on-premises routers are configured with the same routes.

A firewall is blocking the traffic across the second VPN connection.

You do not have a load balancer to load-balance the network traffic.

The ASNs being used on the on-premises routers are different.